Ford windsor jr 302 heads and holley 570 street avenger carb

View previous topic View next topic Go down

Ford windsor jr 302 heads and holley 570 street avenger carb

Post by mjr46 on Fri May 01, 2015 10:07 pm

These are windsor jr 180cc heads with 1.94/1.60 manley valves, 58cc combustion chambers, 3/8 studs with guide plates, The springs are currently set up for a mild flat tappet cam......if you wish to run these heads with a hydraulic roller, I have a set of springs and retainers to do such for an extra with any spring set up on heads they should be matched to cam specs.....These heads are cleaned up and read to bolt on. Included is a set ofcomp cams roller tip rockers and a set of used ARP head bolts......I have a lot of money invested in these heads so no low ballers. PM to contact me and I will reply back asap 650.00 obo These heads have minimal use and are in very good shape

this was on an 84 gt......less than 2 years old, just removed and worked great, customer upgraded to larger carb. part number 80570
225.00 it was 424.00


Number of posts : 644
Age : 42
Location : Maryland
Registration date : 2008-02-16

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum